OceanCool Immersion Liquid Cooling in Dubai & UAE
OceanCool immersion cooling submerges servers in a non-conductive dielectric fluid that absorbs heat directly, supporting up to 50 kW per tank with no mechanical refrigeration. For AI, HPC, cloud and edge computing. Supplied by MMC UAE.
ATTOM distributor · UAE · Saudi Arabia (KSA) · Qatar · Stock in Dubai · 4–8 week lead time · Warranty & AMC in Dubai
How immersion cooling works
In immersion cooling, servers sit in a tank of colourless, odourless, non-toxic, electrically insulating fluid. The fluid absorbs heat from every component and carries it to a heat exchanger. With no server fans and no compressors, energy use drops dramatically, and equipment is sealed from dust, humidity and pollutants. That matters in UAE environments where sand and humidity shorten hardware life.
OceanCool tanks support up to 50 kW per tank, making very high density possible in a small footprint. Server compatibility, maintenance procedures and the facility heat-rejection loop (dry cooler or cooling tower) are confirmed for each project.
Energy efficiency: ATTOM’s OceanCool guidance describes liquid cooling reducing data-center PUE to below 1.3. This is facility-level guidance, not a guaranteed OceanCool tank rating. Actual PUE depends on IT load, heat rejection, pumps, power losses and local operating conditions; MMC UAE confirms the design basis for each project.
Specifications
| Cooling method | Single-phase dielectric immersion |
|---|---|
| Density | up to 50 kW per tank |
| Fluid | Compatible dielectric fluoride liquid or mineral oil; confirm for the hardware |
| Refrigeration | No mechanical refrigeration |
| Applications | AI, HPC, cloud, 5G, edge, enterprise |
| PUE | Facility-specific; ATTOM guidance describes below 1.3 for liquid-cooled data centers (not a guaranteed product rating) |
Values depend on model and configuration. MMC UAE confirms the final specification in your quotation.
Product documents
OceanCool Immersion liquid cooling brochure en v1.1 (PDF)Product gallery
Related products
All products ↗
SmoothAir Rear Door Heat Exchanger (RDHx) for High-Density Racks
SmoothAir RDHx replaces the rear door of a rack with a refrigerant-based heat exchanger, removing up to 30 kW at the source before hot air reaches the…
Explore details ↗
ByteCool Direct-to-Chip Liquid Cooling for AI & HPC
ByteCool is ATTOM's direct-to-chip (cold plate) liquid cooling system for AI, GPU and HPC servers.
Explore details ↗Frequently asked questions
Useful answers to help you plan your next step.
Discuss your requirements ↗Is immersion cooling safe for servers?
Yes. The dielectric fluid doesn't conduct electricity.
What density does it support?
Up to 50 kW per tank.
Do servers need modification?
Usually fans are removed and some components checked. We confirm hardware compatibility.
What PUE can an OceanCool installation achieve?
ATTOM’s OceanCool guidance describes data-center PUE below 1.3 with liquid cooling. Actual facility PUE depends on the complete site design and operating conditions. MMC UAE confirms the project target; no fixed tank-level PUE is guaranteed.
Is OceanCool Immersion Liquid Cooling available from stock in Dubai, and what support do you provide?
MMC UAE is the official ATTOM distributor for the UAE, Saudi Arabia and Qatar. We hold stock in Dubai. Project-specific configurations typically take 4–8 weeks, depending on size and options. We provide installation and commissioning, manufacturer-backed warranty, and Annual Maintenance Contracts (AMC) from our Dubai team.
How can we help?
Contact our team about products, installation or ongoing support.
14th Floor, Tamani Arts Building, Business Bay, Dubai
Send an enquiry
OceanCool Immersion Liquid Cooling